Posts

Showing posts with the label dcc

Test Run of the MTH RS-1 Diesel Locomotive

Image
A fter replacing the traction tires on my O scale MTH Hudson steam locomotive the other day, I put my O scale MTH RS-1 diesel locomotive on the test track for a test run too.  I figured it was a good time to maintain and test this diesel locomotive since I was on a roll with all these model railroading maintenance tasks.  Unfortunately, the moment this diesel engine started rolling, the traction tires broke off three of the four wheels with traction tires! I immediately ordered a new set of traction tires that should arrive in the next week.  Installing these four traction tires on this diesel engine should be even easier than replacing the traction tires on my Hudson steam locomotive.  My Hudson steam locomotive ended up being a much easier project that I thought it would be, which was great, but this diesel engine should be even easier.  In the meantime, I removed the RS-1 from the test track and removed the one traction tire that did not break apart.  Even though this lone traction

Another Great Find

Image
I am always on the lookout for specific model trains in online auctions. (I have a long list of trains on my wish list!) Every month or two I find a few model trains that are on my list of trains that will work for my little fictional model railroad world I have designed and plan to build.  About two weeks ago, I found an auction for a few O scale  diesel locomotives. For those whom are not familiar with model train scales, trains in O scale are  Lionel-sized trains but these particular locomotives run on 2 rails rather than 3 rails. I've been on the lookout for a couple more of these locomotives so I can have a few on hand to use for parts. These trains are no longer in production so parts either need to be custom-made or salvaged from other locomotives. Now, here were four more of these F9 diesel locomotives.  The auction was to end in a week. I saved these locomotives to my eBay Watch List but, at the time, my interest wasn't fully there. I figured I would follow the au

Programming Model Locomotives

Image
Bachmann, O scale, narrow gauge, 4-6-0 steam locomotive. I've been trying to get up to speed with Digital Command Control (DCC) for model trains for the past few months. Well... I started trying to educate myself a couple of years ago but have had difficulty grasping how to fully utilize DCC without having a locomotive to program or even a DCC controller. Over the past year or so, I've collected some DCC locomotives and a couple of different control systems. I'm learning more but it is a bit frustrating for a few reasons. First off, if you want to take a fairly easy route, you can just buy a DCC locomotive and use it in its default configuration with just about any DCC controller. This is certainly the easiest and quickest way to get up and running in DCC. That is not me though. I like to perfect things to my own preferences. I'd like to write a blog post about all the difficulties in programming... all the different DCC systems available today... compatibili

Numbering My Fleet

Image
Back a couple of years ago, I happened to win an O scale (the old Lionel size) diesel locomotive on eBay for about $25. It runs on traditional 2 rails rather than 3 rails and can even run well on the tight curves necessary in a relatively small room (I have no room for large sweeping curves). I wanted to find a few more of these EMD F9 locomotives. About a week ago, someone advertised three of these locomotives up for auction on eBay. Finally! Long story short... I won the first one... was quickly outbidded for the second one... and then won the third one! The two diesels I won are still in the hands of the US Post Office but I'm already putting together a plan for this small fleet of locomotives. First, I needed to come up with a numbering scheme. There is a big "853" on the side of each of these diesels. Repainting is too much work so I decided to just add a suffix to each number...  853A, 853B, and 853C. This morning, I set out to create backlit numberboards for

Power Feeds

Image
(As I wrote in my previous blog post, I'm experiencing some lousy health tonight. From past experience, I know I will be in and out of the bathroom for a significant amount of time through the night tonight so that gives me some time to write between the waves of nausea, dizziness, lightheadedness, and all the other 'fun' symptoms.) Power feed panel with simple banana jacks. This little layout is sitting on the floor on top of a plastic drop cloth which is what you are seeing covered in all that messy brown paint. I've finished preparing power feeds for Lukey's new train layout (one of his Christmas presents this year). Making the power feeds themselves was a piece of cake. Actually, it was so easy, I'm not sure why I never did this before now! Putting together the power feed jack panel, on the other hand, was a bit of a problem.... In the future, when I make one of these power feed jack panels, I'll be sure to leave more room behind the panel for wi