Scattered Thoughts . . .

I t is that time of year...  albeit a very short period of time up here in Vermont...  but it is sailing season!   All the grandkids will be here this coming weekend so I want to make sure the sailboat is ready for playing.  I raise the sail, install the rudder and run all the lines so that the kids can play.  Well...  that's assuming it isn't too windy for the sail to be up. I store the sailboat upside-down through the very long winter.  Today, I cleaned the bottom of the hull and then Sheila and I turned her over so I could clean the topside.  She was filthy!   After I cleaned the hull, I applied a quick coat of wax and then buffed it out.  It could use another coat or two of wax but the hull is looking nice already with a minimal amount of work.   I still need to clean the sail, fix the mast with a new part which will test my metalworking skills (which I do rarely), run new lines, and put a quick coat of varnish on the rudder and centerboard.  All of this should go fairly qu

I built a dolly for my sailboat about ten years ago or so.  This dolly resembles a boat trailer but, rather than being made out of galvanized steel and being roadworthy, it is simply made out of wood and meant only as a safe way to move the boat around the backyard as well as a place to keep the boat in the backyard.  This dolly was well worth the time and effort in building it. Over the years, one of the axles has bent causing the wheel to bind against the frame of the dolly.  This binding definitely defeats the purpose of the dolly.  The dolly was meant to provide a very easy way of moving the boat around when necessary and that has become quite difficult with one of the wheels binding. Truth be told, this is another one of those small projects that I have had on my to-do list for a couple of years but I kept putting it off.  Well, I tackled this project yesterday and now I can move the sailboat anywhere in the yard with ease.   In the coming weeks, I hope to clean the boat and wax

Lukey really seems to enjoy sailing and I definitely enjoy our time out on the boat together. We went sailing a few times this summer, as always, but this summer I managed to capture some video of one of our outings with the intention of sharing it here. Well... okay... the real intention was to add this video to my large collection of videos of the grandkids. I did, however, want to also share it here. I shot about 30 minutes of video on this particular outing but I miraculously edited the video down to about 12 minutes so it is a bit more bearable to watch... especially for those of you who aren't Lukey or me! It is still a bit long but I wanted to keep all the minutes of footage that showed some interaction between the two of us. There was plenty of time when we just enjoyed the sailing in silence but, as Lukey gets older, there is more and more talk between the two of us when we are on any of the boats. We both had a great time... Lukey was a pleasure on the boat and it

I've been struggling with some ideas of what to do with all of my older video clips shot on cameras with far lower resolutions than is typically displayed today.  The video world and televisions are quickly upgrading to 4K while 6K and 8K cameras are already readily available. Full HD video clips only fill one quarter of a 4K screen... so... what to do with all these older clips to make them look acceptable at a time when resolutions are increasing drastically? To make matters worse, I have a lot of HD video (not "Full HD") which is even smaller! I got to thinking that I could use those lower resolution video files in picture-in-picture windows and they might not look so bad at the higher resolutions. The only way to know for sure was to try it. A screenshot of this side-by-side video technique. I went searching for some video clips and found some sailing clips that I shot way back in 2013. We were at the lake for Adam's birthday on this day. It's always

Over the weekend, Sheila and I tackled getting the boats ready for our very short summer season. I ran into some issues with the sailboat... I left the sailboat sitting upright on a homemade dolly with the mast in place. The sleeve for the mast filled with water while the mast sat in this wet sleeve...  probably froze, thawed, froze, thawed, etc, over and over through the winter... and when I lifted out the mast the other day, it fell apart. I won't make that mistake again. The sailboat will be disassembled and put away for winter this year! I managed to make do with spare parts I have on hand but the mast will need to be replaced eventually. It should be okay for this season though. Everything else looked pretty good and functional. That being said, I still would not be surprised if I find a new problem when we put the boat in the water at the lake house. While I fixed, cleaned, waxed and re-rigged the sailboat (replaced some old, worn rope), Sheila cleaned up and waxed the

Seven seconds... That is all the time that elapsed between the first shot posted here which shows Adam a little bit bored and the second shot which shows Adam hiking over to keep the sailboat from capsizing... seven quick seconds.  Things change quickly on the water but when you are sailing such a small, light and nimble boat such as the Minifish, these quick changes require fast thinking and quick action to avoid heeling over and ending up in the water. We had a week of some pretty wild sailing conditions. The wind would be calm and then within seconds the wind would whip up suddenly creating white caps on the lake. The wind would gust to well over 30 knots from a sustained wind of only 12 knots... then the wind would instantly change direction by up to 90 degrees! Some of this quick thinking and fast action involved knowing how to duck in an instant as the wind suddenly gusted and changed direction, slamming the boom over to the other side of the boat, narrowly missing your hea

Although all the parts have been sitting around the house, shed and yard for the past year or more, I finally managed to put together a dolly for my sailboat yesterday. It has been a long time coming! If I had to do it over again, I would definitely change a few things in the design. This always happens though. I design something... build it... and then realize something is just not 'right'. I'm always trying to improve things. I suppose there is nothing wrong with that but it does get a bit tiring especially considering my health. Right now this dolly has a flat tire. When the snow eventually melted a few weeks ago, I noticed that one of the tires is flat. I had already assembled the basic frame of this dolly... the long tongue and the axle... and had mounted two 10" tires on it. All last summer I just propped the sailboat on this makeshift dolly using scrap 2x4 blocking. Unfortunately, whenever I moved the dolly around the yard (ie, for cutting the lawn), the b

My sailing video is finally produced and published online! This video was a long time coming and required a lot of work over the past few months.  I will write more about the challenges I faced in producing this video in the next few days.  These challenges ranged from difficulty getting the sailboat ready to video workstation problems.  More on that will be coming soon. In the meantime, I would like to present my sailing video.   I hope you enjoy it as much as I do!

The sailing season is almost upon us but I still have some work to accomplish on the sailboat.  We are excited to be heading to the lake house in a few short weeks but the sailboat must be ready by then! Most of the parts I have ordered have arrived so I can now begin working on the hull and installing new parts. The main thing that needs to be accomplished, above all else, is to do some much needed hullwork.  This past winter we had some water get into small cracks in the gelcoat and then freeze.  The expanding frozen water cracked out a larger hole in the gelcoat.  This gelcoat is applied over the fiberglass hull, sanded smooth, and then some serious elbow grease is needed to wax the shine into the newly applied gelcoat. This photo, to the left, shows the cracked out gelcoat on the hull.  I also have a few other small areas of the hull which could use some attention so I will work on those areas as well.  Eventually, I would like to refinish the entire surface of the hull..