Scattered Thoughts . . .

I've been overwhelmingly exhausted this past week so I really haven't been doing much other than sleeping, eating and using the bathroom.  This morning, however, we had an unusually clear, sunny sky so I decided to do some solar observing with a couple of telescopes.  I felt that I had enough energy in me to drag a couple of telescopes out of the house for a simple observing session so that is what I did.   I had quickly decided to just make this an observing session only though.  To do a "proper" imaging session would require far more equipment including a computer and associated cables and thus would require far more energy.  This was energy I still didn't have just yet.  Honestly, I was still feeling as though I could sleep for another week before diving into anything too taxing.  My plan was to just observe the sun for about an hour or so while saving enough energy to then put everything back in storage.  (It turns out that I did not have enough energy to prop

I made two solar filters relatively recently.  One was made a little over a year ago (pictured at right) and the other was made a little over two years ago (next picture, below).  I was happy with these two filters but rarely used them because I have far better types of solar filters to use.  I think my primary reason for this exercise in making these filters was simply for the experience more than any other reason although there were a couple of other reasons (which I'll address below).  But let me start this blog entry by saying that I will never again use one of these piece-of-garbage, flimsy, and consequently, dangerous Baader film solar filters! I haven't used either filter more than three or four times each in this two year period and they have been handled exceptionally carefully ( never touching the filter material) and stored in protective zip-lock bags and these bags placed inside protective boxes for storage until the next use.  Even though these two filters were