Scattered Thoughts . . .

I was feeling halfway decent this morning so I spent the morning working on the master bathroom. (Having only one toilet in the house this past week is getting old already! I'm definitely looking forward to having a nice new second toilet in the house!) I had previously removed the old finish flooring to reveal a lot of rotten wood subflooring and about three layers of old, nasty vinyl flooring. Today I needed to figure out how much of the floor was rotten and remove it all. I started pulling up the subflooring with my hands... it would just crumble as I grabbed it so it pulled apart quite easily but made a huge mess. It wasn't long before I decided to just cut back enough to make a 24"x24" hole. First I marked off a 24" square... then out came the circular saw... and I started cutting... first, at only a 1/2" deep... I pulled up more subflooring...  then I cut a bit deeper... pulled out more subflooring... I changed the depth of the cut four times

All the electrical works! Dimmer switch at left, fan delay timer at center, and GFCI outlet at right. I managed to get a little bit more accomplished on the half bath yesterday. That wore me out and I had some health issues later that night so I took another day off today for rest and recovery. Actually, I slept the entire day! I installed the subfloor as well as the underlayment. That was a fairly easy job. We now have another clean and level spot in the old house! Oh, and a solid spot!  Once I get a primer for the self-adhesive tiles, I can finish the flooring. I have a couple of extra boxes of the tile flooring that we had installed in the hallway that we plan to continue on into this new half bath.  A week or so ago, I had written that I installed all the wiring and tested all the fixtures and everything was fine... While everything worked fine (meaning I had wired everything correctly), I had a problem fitting these bulky electronic switches/timers/outlets into the parti