Posts

Showing posts with the label leaking

Fatigue, Pain, Leaking Washing Machines and a Leaking Roof

Image
I t has been a pretty quiet week.  The weather has been lousy and my energy level has been depleted so I have mostly been resting and sleeping this week.   We had a leaking washing machine.  I quickly determined it was a leak out the front door of the washer due to gunk, grime and sliminess on the door boot seal.  I spent a day and a half resolving that problem.   First, I spent half a day manually cleaning the inside of the washing machine as well as inside all the folds of the door boot seal.  I didn't want to be too abrasive on the seal because I knew that would only cause more leaking so I carefully and methodically cleaned it up, little by little.   While I was doing that, I also ordered a new boot seal for the front door in case my efforts failed or in case this fix only lasts a short time.  Plus, I don't want to be without a washing machine for a week or two so I would prefer to have a part that I know I will need on hand for when we do need it.  That new boot seal arriv

Rotten Wood Removed

Image
I was feeling halfway decent this morning so I spent the morning working on the master bathroom. (Having only one toilet in the house this past week is getting old already! I'm definitely looking forward to having a nice new second toilet in the house!) I had previously removed the old finish flooring to reveal a lot of rotten wood subflooring and about three layers of old, nasty vinyl flooring. Today I needed to figure out how much of the floor was rotten and remove it all. I started pulling up the subflooring with my hands... it would just crumble as I grabbed it so it pulled apart quite easily but made a huge mess. It wasn't long before I decided to just cut back enough to make a 24"x24" hole. First I marked off a 24" square... then out came the circular saw... and I started cutting... first, at only a 1/2" deep... I pulled up more subflooring...  then I cut a bit deeper... pulled out more subflooring... I changed the depth of the cut four times